''

Search

Cart

  • Cart Empty!
Mailing address
Yes Infotech Ltd
Hammerain House, Hookstone Avenue
Harrogate
HG2 8ER
UK

Call us
01423 873665
Email us

Registration No: 4624064
VAT No: 804 2719 47
curve_type_3_left_tcurve_type_3_right_t
Cisco Aironet Low Loss Cable Assembly 20-ft With Rp-tnc Conn

Cisco Aironet Low Loss Cable Assembly 20-ft With Rp-tnc Conn

£94.40 
£113.28 
Part Number: AIR-CAB020LL-R
Language: NS
Real time Stock Check

Product Details

Introduction

The antennas in a wireless network installation must be close to the users. The location of the antennas are not necessarily required to be close to the connected switch or to a computer room. The cable run can be 100 feet or more from the AP or bridge to antenna locations.

RF energy is carried between the antennas and the radio equipment through a coaxial cable. An antenna cable introduces signal loss in the antenna system for both the transmitter and receiver. To reduce signal loss, minimize the cable length and use only low-loss or ultra low-loss antenna cable to connect radio devices to antennas.

RF coaxial cable = loss of signal strength

Loss of signal strength is directly proportionate to the length of the cable segment. As the diameter of the cable increases, signal loss is decreased, but at much higher purchase cost. As signal frequency increases (higher numbered channel) loss increases.

Low-loss cable extends the length between any Cisco Aironet product and its antenna. With a loss of 6.7 dB per 100 feet (30m) for low-loss cable and 4.4 dB for the ultra low-loss cable, these cables provide installation flexibility without a significant sacrifice in range or performance.

Features

Cable length

6 m

Other features

Connector(s)

RP-TNC